Siemens SIMATIC ET 200SP Equipment Manual page 25

Technical specifications
6.1 Technical specifications
Article number
• Number of operating cycles, max.
Switching capacity of contacts
with inductive load, max.
–
with resistive load, max.
–
Thermal continuous current, max.
–
Switching current, min.
–
Rated switching voltage (DC)
–
Rated switching voltage (AC)
–
Cable length
• shielded, max.
• unshielded, max.
Interrupts/diagnostics/status information
Diagnostics function
Substitute values connectable
Alarms
• Diagnostic alarm
Diagnostic messages
• Monitoring the supply voltage
• Wire-break
• Short-circuit
• Group error
Diagnostics indication LED
Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
•
• Channel status display
• for channel diagnostics
• for module diagnostics
Potential separation
Potential separation channels
• between the channels
• between the channels and backplane bus
• between the channels and the power sup-
ply of the electronics
Permissible potential difference
between channels and backplane bus/supply
voltage
Isolation
Isolation tested with
24
6ES7132-6MD00-0BB1
7 000 000; see additional description in the man-
ual
2 A; see additional description in the manual
5 A; see additional description in the manual
5 A
100 mA; 5 V DC
24 V DC to 120 V DC
24V AC to 230V AC
1 000 m
200 m
Yes
Yes
Yes
Yes
No
No
Yes
Yes; green LED
No
Yes; green/red DIAG LED
Yes
Yes
Yes
240 V AC
2 500 V DC (type test)
Digital output module RQ 4x120VDC-230VAC/5A NO MA ST (6ES7132-6MD00-0BB1)
Equipment Manual, , A5E36107692-AB