Siemens SIMATIC ET 200SP Equipment Manual page 16

Parameter
Reaction to CPU STOP
Potential group
Due to the limited number of parameters at a maximum of 244 bytes per ET 200SP station with a PROFIBUS GSD configu-
1
ration, the configuration options are restricted. If required, you can assign these parameters using data record 128 as de-
scribed in the "GSD file PROFINET IO" column (see table above). The parameter length of the I/O module is 4 bytes.
Digital output module RQ 4x120VDC-230VAC/5A NO MA ST (6ES7132-6MD00-0BB1)
Equipment Manual, , A5E36107692-AB
Range of values
• Turn off
• Keep last value
• Output substitute val-
ue 1
• Use potential group of
the left module
(module plugged into a
dark-colored BaseUnit)
• Enable new potential
group (module plugged
into light-colored Ba-
seUnit)
Default Parameter
reassign-
ment in RUN
Turn off Yes
Use potential No
group of the
left module
Parameters/address space
4.1 Parameters
Effective range with configura-
tion software, e.g. STEP 7
(TIA Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Channel Module
Module Module
1
15