Address Space - Siemens SIMATIC ET 200SP Manual

Parameters/address space

4.3 Address space

4.3 Address space
The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image of the inputs.
Configuration options of DI 8x24VDC BA
You can configure the module with STEP 7 (TIA Portal) or with a GSD file. If you configure
the module using a GSD file, the configurations are available under various short
designations/module names; see the table below. The following configurations are possible:
Table 4- 2 Configuration options with GSD file
Configuration
1 x 8-channel without value status DI 8x24VDC BA V0.0
Address space
The figure below shows the assignment of the address space for DI 8x24VDC BA.
Figure 4-1
16
Short designation/module
name in the GSD file
Address space of DI 8x24VDC BA
Configuration software, e.g. with STEP 7 (TIA Portal)
Integrated in GSD file
hardware catalog PROFINET IO
STEP 7
V14, SP1 or high-
er with HSP 0222
Digital input module DI 8x24VDC BA (6ES7131-6BF01-0AA0)
GSD file
PROFIBUS DP
X X
Manual, 02/2019, A5E34941724-AB