Siemens SIMATIC ET 200SP Manual page 10

Properties
The module has the following technical properties:
● Digital input module with 8 inputs
● Supply voltage L+
● Sink input (PNP, sinking input)
● Configurable input delay 0.05 ms to 20 ms (per channel)
● Suitable for connection of switches and 2-wire sensors according to IEC 61131, type 1, 2
and 3
The module supports the following functions:
Table 2- 1 Version dependencies of the functions
Function
Identification data I&M0 to
I&M3
Reconfiguration in RUN
You can configure the module with STEP 7 and with a GSD file.
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification labels
● Shield connector
See also
You can find additional information on the accessories in the ET 200SP distributed
I/O system (https://support.automation.siemens.com/WW/view/en/58649293) system
manual.
Digital input module DI 8x24VDC BA (6ES7131-6BF01-0AA0)
Manual, 02/2019, A5E34941724-AB
HW ver- FW ver-
sion sion
FS01 V0.0.0 V14 or higher
and with HSP 0222
higher
FS01 V0.0.0 V14 or higher
and with HSP 0222
higher
STEP 7
TIA Portal V5.x
V5.5 SP3 or
higher with
HSP 0229
V7.0
V5.5 SP3 or
higher with
HSP 0229
V7.0
Product overview
2.1 Properties
GSD file
PROFINET IO PROFIBUS DP
X X
X X
9