Emulation Module; Equipment Supplied - HP 16600A Series User Manual

Emulation Module

This section lists equipment supplied with the emulation module and
lists the minimum equipment required to use the emulation module.

Equipment supplied

The equipment supplied with your emulation module includes:
• An HP 16610A emulation module. If you ordered an emulation module as
part of your HP 16600A or HP 16700A logic analysis system, it is already
installed in the frame.
• A target interface module (TIM) circuit board.
• A emulation module loopback test board (HP part number E3496-66502).
• Firmware for the emulation module and/or updated software for the
Emulation Control Interface on a CD-ROM.
• A 50-pin ribbon cable for connecting the emulation module to the target
interface module or the HP E2480A analysis probe.
• A 10-pin ribbon cable for connecting the target interface module to the
target system.
• Torx T-8, T-10 and T-15 screwdrivers.
• This User's Guide.
Solutions for CPU32
Chapter 1: Overview
Emulation Module
25