Configuring The Emulation Module; What Can Be Configured - HP 16600A Series User Manual

Chapter 6: Connecting and Configuring the Emulation Module

Configuring the Emulation Module

Configuring the Emulation Module
The emulation module has several user-configurable options. These
options may be customized for specific target systems and saved in
configuration files for future use.
The easiest way to configure the emulation module is through the
Emulation Control Interface in an HP16600A or HP16700A logic
analysis system.
If you use the Emulation Control Interface, please refer to the online
help in the Configuration window for information on each of the
configuration options.
Other ways to configure the emulation module are by using:
• the emulation module's built-in terminal interface
• your debugger, if it provides an "emulator configuration" window which
can be used with this HP emulation module

What can be configured

The following options can be configured using the Emulation Control
Interface or using built-in commands:
• Processor type.
• Processor clock speed.
• Initial values for internal registers (see Chapter 7, "Using Internal
Registers (SIM and EMSIM Registers)," beginning on page 159).
The following option can be configured using built-in commands:
• Restriction to real-time runs.
The built-in "help cf" command also lists the following options, which
are provided only for compatibility with standalone emulation probes:
• BNC break in behavior.
• BNC trigger out behavior.
146 Solutions for CPU32