HP 16600A Series User Manual page 194

Chapter 8: Using the Emulator with a Debugger
Using the Software Development Systems debugger
Using the Software Development Systems
debugger
Compatibility
Version 7.2 of the SingleStep debugger from Software Development
Systems, Inc. is one of several debuggers which connect to the HP
emulation module.
This section provides information that is specific to using SingleStep
with the HP emulation module. It is intended to be used in conjunction
with the SingleStep documentation provided by SDS.
Overview
Host computer LAN
Logic analysis
system with
Target
emulation
SingleStep
module
Startup behavior
The following actions are performed at the start of a session and when
you select File©Debug:
• If the target reset option is selected, the target is reset and programmed
with the register values in the configuration file (<filename>.cfg).
• Hardware breakpoints are disabled.
• Software breakpoints are enabled.
• All breakpoints are cleared.
• main() _exit breakpoints are set, if that option is selected.
Solutions for CPU32 193