僅 Smart Key Immobilizer System - Kia Telluride 2023 Manual

Features of your vehicle
Smart key immobilizer system
The immobilizer system protects your
vehicle from theft. If an improperly
coded key (or other device) is used, the
vehicle's power system is disabled.
When the ENGINE START/STOP button
is placed in the ON position, the immobi-
lizer system indicator should come on
briefly, then go off. If the indicator starts
to blink, the system does not recognize
the coding of the key.
Place the ENGINE START/STOP button
in the OFF position, then place the
ENGINE START/STOP button in the ON
position again.
If the system repeatedly does not recog-
nize the coding of the key, it is recom-
mended that you contact your Kia
dealer.
Do not attempt to alter this system or
add other devices to it. Electrical prob-
lems could result that may make your
vehicle inoperable.
If the following objects are placed near
the ENGINE START/STOP button, there
may be a problem with starting the
engine.
1. Metal accessories
2. Another registered key
3. Keys registered in other vehicles
4. Electronic device
NOTICE
When starting the vehicle, do not use the
key with other immobilizer keys around.
Otherwise, the vehicle may not start or
may stop soon after it starts. Keep each
key separate in order to avoid a starting
malfunction.
4 12
This device complies with Indus-
try Canada licence-exempt RSS
standard(s).
Operation is subject to the following two
conditions:
1. This device may not cause interfer-
ence, and
2. This device must accept any interfer-
ence, including interference that may
cause undesired operation of the
device.
NOTICE
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's author-
ity to operate the equipment. If the
smart key is inoperative due to changes
or modifications not expressly approved
by the party responsible for compliance,
it will not be covered by your manufac-
turer's vehicle warranty.
Smart key