Kia Telluride 2023 Manual page 489

Maintenance
tions. The moisture inside the lamp
would disappear if you drive the vehicle
with the headlamp turned on, however,
the level at which the moisture is
removed may differ depending on the
size/location/condition of the lamp. If the
moisture continues to stay inside the
lamp, have the vehicle checked by an
authorized Kia dealer.
If you don't have the necessary tools, the
correct bulbs and the expertise, consult
an authorized Kia dealer. In many cases,
it is difficult to replace vehicle light bulbs
because other parts of the vehicle must
be removed before you can get to the
bulb. This is especially true if you have to
remove the headlamp assembly to get
to the bulb(s).
Removing/installing the headlamp
assembly can result in damage to the
vehicle. If non-genuine parts or substan-
dard bulbs are used, it may lead to blow-
ing a fuse or other wiring damages. Kia
Genuine Parts we guarantee for quality
and performance.
Do not install extra lamps or LEDs to the
vehicle. If additional lights are installed, it
may lead to lamp malfunctions and flick-
ering. Additionally, the fuse box and
other wiring may be damaged.
Light bulb position (Front)
Headlamp
OON072032
Fog lamp
OON072036
1. Headlamp (Low) (LED Type)
2. Headlamp (High) (LED Type)
3. Position lamp / Daytime running lamp
/ Front turn signal lamp (LED Type)
4. Side marker (LED Type)
5. Front fog lamp (LED Type)
Light bulb position (Rear)
Rear combination lamp - Type A
OON072040
Rear combination lamp - Type B
OON072039
Light bulbs
8
8 49