Kia Telluride 2023 Manual page 357

Driver assistance system
Press the ( ) switch or depress the
brake pedal to temporarily cancel Smart
Cruise Control.
Resuming Smart Cruise Control
OON052293_3
To resume Smart Cruise Control after
the function was canceled, operate the
(+), (-) or ( ) switch.
If you push the (+) switch up or (-) switch
down, the set speed will be set to the
current speed on the cluster.
If you press the ( ) switch, vehicle
speed will resume to the preset speed.
WARNING
Check previous set speed before using
the ( ) switch. Driving speed may
sharply increase or decrease when you
press the ( ) switch.
Turning off Smart Cruise Control
OON052291
Press the Driving Assist button to turn
Smart Cruise Control off.
NOTICE
If your vehicle is equipped with Manual
Speed Limit Assist, press and hold the
Driving Assist button to turn off Smart
Cruise Control. However Manual Speed
Limit Assist will turn on.
Smart Cruise Control (SCC)
WARNING
Do not use the switches and buttons at
the same time. Smart Cruise Control
may not operate properly.
Displaying operating status
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to "LCD
Display Modes" on page 4-79.
OON052357
Smart Cruise Control will be displayed as
below depending on the status of the
function.
僅 When operating
1. Whether there is a vehicle ahead
and the selected distance level
2. Set speed
3. Whether there is a vehicle ahead
and the target vehicle distance
僅 When temporarily canceled
1. Your vehicle (shaded)
2. Previous set speed (shaded)
3. Whether there is a vehicle ahead
(shaded) (if equipped)
Accelerating temporarily
OON052358
If you want to speed up temporarily
without altering the set speed while
6
6 61