Kia Telluride 2023 Manual page 187

Features of your vehicle
- When the function is enabled, high
beam will turn on when vehicle
speed is above 40 km/h (25 mph).
When vehicle speed is below 25
km/h (15 mph), high beam will not
turn on.
- The High Beam (
will appear on the cluster when
high beam is on.
僅 When High Beam Assist is operating,
if the headlamp lever or switch is
used, the function operates as follows:
- If the headlamp lever is pulled
towards you when the high beam is
off, the high beam will turn on with-
out High Beam Assist canceled.
When you let go of the headlamp
lever, High Beam Assist will turn on
again.
- If you push the light switch towards
the instrument cluster, high beam is
turned on and High Beam Assist is
released.
- If the headlamp lever is pulled
towards you when the high beam is
on by High Beam Assist, low beam
will be on and the function will turn
off.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and the
corresponding lamp will turn on.
僅 When High Beam Assist is operating,
high beam switches to low beam if
any of the following conditions occur:
- When the headlamp of an oncom-
ing vehicle is detected.
- When the taillamp of a vehicle in
front is detected.
- When the headlamp or taillamp of a
motorcycle or a bicycle is detected.
Malfunction and limitations
) indicator light
Malfunction
A: Check High Beam Assist system
When High Beam Assist is not working
properly, the 'Check High Beam Assist
system' warning message will appear
and warning light (
the cluster. Have the function inspected
by an authorized Kia dealer.
Limitations
High Beam Assist may not work properly
in the following situations:
僅 Light from a vehicle is not detected
僅 Headlamp of a vehicle is covered with
僅 A vehicle's headlamps are off but the
僅 There is a lamp that has a similar
僅 Headlamps have been damaged or
僅 Headlamps are not aimed properly.
僅 Driving on a narrow curved road,
僅 Vehicle in front is partially visible on a
- When the surrounding ambient
light is bright enough that high
beams are not required.
- When streetlights or other lights are
detected.
OSG2PH052004N
because of lamp damage, or because
it is hidden from sight, etc.
dust, snow or water.
fog lamps are on and etc.
shape as a vehicle's lamp.
not repaired properly.
rough road, uphill or downhill.
crossroad or curved road.
Lighting
) will appear on
4 105
4