Kia Telluride 2023 Manual page 62

Hide thumbs Also See for Telluride 2023:
Table of Contents

Advertisement

Safety features of your vehicle
(emergency locking mode). So, in order
to secure a child restraint, you must
manually pull the seat belt all the way
out to shift the retractor to the "auto-
matic locking" mode.
The "automatic locking" mode will help
prevent the normal movement of the
child in the vehicle from causing the seat
belt to loosen and compromise the CRS.
To install a CRS on the rear seats, do the
following:
1. Place the CRS on a rear seat and
route the lap/shoulder belt around or
through the child restraint, following
the restraint manufacturer's instruc-
tions.
Be sure the seat belt webbing is not
twisted.
2. Fasten the lap/shoulder belt latch into
the buckle. Listen for the distinct
"click" sound.
Position the release button so that it is
easy to access in case of an emer-
gency.
ONQ5021096N
3. Pull the shoulder portion of the seat
belt all the way out. When the shoul-
der portion of the seat belt is fully
extended, it will shift the retractor to
the "automatic locking" (child
restraint) mode.
ONQ5021095N
3
40
Child Restraint System (CRS)
4. Slowly allow the shoulder portion of
the seat belt to retract and listen for
an audible "clicking" or "ratcheting"
sound. This indicates that the retrac-
tor is in the "automatic locking" mode.
If no distinct sound is heard, repeat
steps 3 and 4.
ONQ5021093N
5. Remove as much slack from the belt
as possible by pushing down on the
CRS while feeding the shoulder belt
back into the retractor.
6. Push and pull on the CRS to confirm
that the seat belt is holding it firmly in
place. If it is not, release the seat belt
and repeat steps 2 through 6.
7. Double check that the retractor is in
the "automatic locking" mode by
attempting to pull more of the seat
belt out of the retractor. If you cannot,
the retractor is in the "automatic lock-
ing" mode.
If your CRS manufacturer instructs or
recommends you to use a tether anchor
with the lap/shoulder belt, refer to
"Securing a child restraint with the
LATCH anchors system" on page 3-37
for more information.
NOTICE
When the seat belt is allowed to retract
to its fully stowed position, the retractor
will automatically switch from the "auto-
matic locking" mode to the emergency
lock mode for normal adult usage.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents