Kia Telluride 2023 Manual page 406

Driver assistance system
Parking Distance Warning mal-
function and limitations
Parking Distance Warning mal-
function
After starting the vehicle, a beep will
sound when the gear is shifted to R
(Reverse) to indicate Parking Distance
Warning is operating properly.
However, if one or more of the following
occurs, first check whether the ultra-
sonic sensor is damaged or blocked with
foreign material. If it still does not work
properly, have the vehicle inspected by
an authorized Kia dealer.
僅 The direction of Parking Distance
Warning sensor malfunction is shown
on the instrument cluster.
OON052271
OON052272
A: Check Parking Distance Warning
system
Parking Distance Warning dis-
abled
OSG2PH052085L
6 110
Forward/Reverse Parking Distance Warning (PDW)
A: Parking Distance Warning system
limited. Ultrasonic sensor blocked
If this occurs, the warning message
appears on the cluster. Parking Distance
Warning will operate properly when
snow, rain or foreign material is
removed. If Parking Distance Warning
does not operate properly after obstruc-
tion (snow, rain, or foreign material) is
removed (including trailer, carrier, etc.,
from the rear bumper), have the vehicle
inspected by an authorized Kia dealer.
Limitations of Parking Distance
Warning
僅 Parking Distance Warning may not
operate properly when:
- Moisture is frozen to the sensor
- Sensor is covered with foreign sub-
stance, such as snow or water
(Parking Distance Warning will
operate properly when such sub-
stance is removed.)
- The weather is extremely hot or
cold
- The sensor or sensor assembly is
disassembled
- The surface of the sensor is
pressed hard or hit with a hard
object
- The surface of the sensor is
scratched with a sharp object
- The sensors or its surrounding area
is directly sprayed with high pres-
sure washer
僅 Parking Distance Warning may mal-
function when:
- Heavy rain or water spray is pres-
ent
- Water flows on the surface of the
sensor
- Affected by another vehicle's sen-
sors