Kia Telluride 2023 Manual page 330

Driver assistance system
brake pedal immediately and check the
surroundings.
僅 Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
WARNING
僅 For your safety, change the Settings
after parking the vehicle at a safe
location.
僅 If any other system's warning mes-
sage is displayed or audible warning
is generated, Blind-Spot Collision-
Avoidance Warning's warning mes-
sage may not be displayed and audi-
ble warning may not be generated.
僅 Vehicle interior/exterior noise may
disturb the driver from hearing the
audible warning of Blind-Spot Colli-
sion-Avoidance Warning. Always pay
attention and keep the vehicle volume
at a moderate level.
僅 Blind-Spot Collision-Avoidance Warn-
ing may not operate if the driver
applies the brake pedal to avoid colli-
sion.
僅 When Blind-Spot Collision-Avoidance
Warning is operating, braking control
by the function will automatically can-
cel when the driver excessively
depresses the accelerator pedal or
sharply steers the vehicle.
僅 During Blind-Spot Collision-Avoidance
Warning operation, the vehicle may
stop suddenly injuring passengers
and shifting loose objects. Always
have the seat belt on and keep loose
objects secured.
僅 Even if there is a problem with Blind-
Spot Collision-Avoidance Assist, the
vehicle's basic braking performance
will operate properly.
6 34
Blind-Spot Collision-Avoidance Warning (BCW)
僅 Blind-Spot Collision-Avoidance Warn-
ing does not operate in all situations
or cannot avoid all collisions.
僅 Blind-Spot Collision-Avoidance Warn-
ing may warn the driver late or may
not warn the driver depending on the
road and driving conditions.
僅 Driver should maintain control of the
vehicle at all times. Do not depend on
Blind-Spot Collision-Avoidance Warn-
ing. Maintain a safe braking distance,
and if necessary, depress the brake
pedal to reduce driving speed or to
stop the vehicle.
僅 Never operate Blind-Spot Collision-
Avoidance Warning on people, ani-
mal, objects, etc. It may cause serious
injury or death.
WARNING
The brake control may not operate
properly depending on the status of ESC
(Electronic Stability Control).
There will only be a warning when:
僅 The ESC (Electronic Stability Control)
warning light is on
僅 ESC (Electronic Stability Control) is
engaged in a different function
Blind-Spot Collision-Avoidance
Warning malfunction and limita-
tions
Blind-Spot Collision-Avoidance
Warning malfunction
OSG2PH052051N