Setup; Change Gas Engine Or Electric Motor - Graco Standard Series Operation, Parts

Setup

Setup
Change Gas Engine or
Electric Motor
1 Turn motor OFF and unplug or turn
engine switch OFF. Loosen belt guard
knob and motor clamp. Perform
Pressure Relief Procedure, page 15.
ti5382a
16
ti7529a
I O
ti25161a
ti5384a
2 Lift belt guard. Remove belt. Tilt
engine/motor and remove
engine/motor.
3 Tilt engine/motor. Install engine/motor.
Install belt. Lower belt guard.
ti18812a
4 Swivel motor clamp. Tighten motor
clamp and belt guard knob.
ti5387a
ti18192a
ti18193a
ti5389a
334606B