Switch Tip™ And Guard Assembly; Spray - Graco Standard Series Operation, Parts

Startup (Electric Models)
Switch Tip
™
Assembly
m
1. Perform Pressure Relief Procedure,
page 15.
2. Engage gun trigger lock. Insert Switch
Tip. Insert seat and OneSeal™.
3. Insert Switch Tip and face forward.
ti13024a
4. Screw assembly onto gun. Tighten.
24
and Guard
ti13023a
ti2710a

Spray

1. Spray test pattern. Increase pressure to
eliminate heavy edges. Use smaller tip
size if pressure adjustment can not
eliminate heavy edges.
2. Hold gun perpendicular, 10-12 in. (25-30
cm) from surface. Spray back and forth.
Overlap by 50%. Trigger gun after
moving and release before stopping.
ti13030a
ti13025a
334606B