Place A Call - Magellan RoadMate 6000T Reference Manual

Note: If your mobile phone doesn't support the "Hands-free" service but just supports the "Headset" service, you simply
need to select your mobile phone from the device list, tap
connect. If you dial a number from your mobile phone or receive an incoming call the "Headset" service will connect
automatically. The main interface will display a "xx connected, partial function supported only" status message, and the
button and

10.1.5 Place a call

You can make calls once the "Hands-free" service has connected successfully.
Four methods are available:
• Place a call via Keypads
• Place a call via Contacts
• Place a call via Call History
• Place a call via Redial.
10.1.5.1 Place a call via Keypads
To place a call via Keypads, tap
• You can enter 13 characters: "0~9", " ﹡ " and "#" with the buttons in the key-
pads. Input "+" by pressing the " ﹡ " for about 1 second.
• You can tap
button for about half a second and the entire row will be deleted.
• Once you have entered the phone number you want to dial, tap
make the call.
10.1.5.2 Place a call via Contacts
If you have stored your contacts' information in "Contacts", you can make the call via "Contacts".
There are two ways to use the "Contacts" to place a call:
• Tap in the main interface.
• Tap in the "Keypads" window.
• Use the "Alphabetical index" to find a contact.
• Tap and
• Choose a contact and tap the number of the contact to make the call.
Chapter 10: Bluetooth
will be greyed out as
and the keypads window will pop up.
to delete the phone number you have entered. Press the
to move up and down to find a contact.
to pair with your mobile phone, and there is no need to
.
to
79