Simulator Mode; Automatic Volume; Tmc Options; Navigation Instruction - Magellan RoadMate 6000T Reference Manual

8.13 Simulator Mode

In Simulator Mode, you can demonstrate the capabilities of the Magellan RoadMate 6000T without actually driving.
In order for the simulation to work, you must set a route first. Select
Select Simulate to begin the simulation.
Set the speed variance of the simulation: x1 will "drive" at normal speed using known speed
limits; x1.5 will "drive" at one and a half times normal speed; x2 will "drive" at two times
normal speed.
Return to the Map screen to view the simulation.
To disable Simulator Mode, select

8.14 Automatic Volume

The Magellan RoadMate 6000T can be set to automatically increase the volume when the vehicle exceeds 45 MPH in order
to compensate for road noise.
Select Automatic Volume
Select the number increment by which to increase the volume.
Enable
Select .
When you have finished, select

8.15 TMC Options

These options are used for the traffic portion of the Magellan RoadMate 6000T. Please refer to Chapter 9, Using Magellan
Traffic, for details.

8.16 Navigation Instruction

You can select to enable or disable street name or exit sliproad name announcements. If the checkbox is checked, the
announcements are enabled. Make your selection and select Save.

8.17 Backup and Restore

The Magellan RoadMate 6000T has the capability to back up your information (Address Book, Previous Destinations, etc.) to
an optional memory card.
Chapter 8: Navigation Options
Stop , or when the power is turned off the Simulator will stop.
.
Save .
Simulator Mode
69
.