Optional Mounting; Instructions For Mounting The Adhesive Disk - Magellan RoadMate 6000T Reference Manual

Optional Mounting

NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA: State law prohibits drivers in California and Minnesota from using
suction mounts on their windscreens while operating motor vehicles. Other state or local laws may also prohibit drivers from
using suction cups on their windscreens. Other Magellan dashboard or friction mounting options should be
available at www.magellanGPS.com. Thales Navigation, Inc. does not take any responsibility for any fines, penalties, or
damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a);
Minnesota Statutes 2005, Section 169.71.)

Instructions for Mounting the Adhesive Disk

1. Locate a flat, non-porous surface on the dashboard or
console. Clean the selected area with the alcohol pad
provided.
Do NOT affix to windscreen.
2. Peel the paper cover off the adhesive backing.
3. Apply the disk to the cleaned surface.
Allow the adhesive disk to cure in the vehicle at room
temperature (72°F) for 24 hours before attaching the
windscreen mount.
4. Attach the windscreen mount to the adhesive disk by firmly
pressing the suction cup against the disk. Lock the suction
cup by pressing the locking lever.
Position the mount so that the Magellan RoadMate is at a
comfortable viewing level.
Appendix
108
used
and are