Detouring From The Planned Route; Excluding A Manoeuvre In The Planned Route - Magellan RoadMate 6000T Reference Manual

6.10 Detouring from the Planned Route

If you exit the planned route, the Magellan RoadMate 6000T will get you back on course in one of three ways.
1. If, while driving, you detour from the planned route, the Magellan RoadMate 6000T will automatically recalculate
the route based on your new vehicle position.
2. If you exit the planned route before its completion and turn off your vehicle, the Magellan RoadMate 6000T will
switch to battery power, unless your cigarette lighter maintains constant power. In either situation, the Magellan
RoadMate 6000T will automatically suspend power when enabled through customisation. While in "sleep" mode,
navigation functions will be suspended and guidance will resume when the Magellan RoadMate 6000T wakes up.
3. If while routing, the Magellan RoadMate 6000T fails to respond, reset the Magellan RoadMate 6000T as described
on page 12. The Resume Guidance screen will appear.
Resume
Select
Select Cancel to clear the route and display the Destination screen.

6.11 Excluding a Manoeuvre in the Planned Route

While travelling or setting up your destination you may find it necessary to exclude one of the manoeuvres in the Manoeuvre
List. This could be due to an accident or road maintenance you wish to avoid. The Magellan RoadMate 6000T provides you
with tools to select a specific manoeuvre, exclude it from the planned route and reroute the trip.
VIEW
Press the key to get to the Manoeuvre List. Select the manoeuvre you wish to exclude.
The details for the manoeuvre are displayed. Select
The trip will be recalculated, excluding the selected manoeuvre. This calculation is done using
the same Route Method that was chosen originally. After the route is recalculated, the Map
screen is displayed.
Chapter 6: T ravelling
to continue the route to the selected destination.
Exclude .
22