Magellan MobileMapper CX Getting Started Manual page 56

Icon Function
Tap this icon to close the Mission Planning utility window.
- Tap this icon to choose the location on Earth for which Mission
Planning will determine the GPS constellation.
- You can key in the exact coordinates of your site or directly tap
on the map to indicate where this site is (see screen example
opposite). Tapping on the map automatically updates the
coordinates in the Latitude and Longitude fields.
- Then tap OK to validate these coordinates. This takes you
back to the Mission Planning window on which you can see
the GPS constellation for this location.
Tap this icon to set the exact date & time for which you want
Mission Planning to determine the GPS constellation for the
selected location.
Tap this icon to open the Setup window. This window allows you
to set the cut-off angle, the maximum PDOP value and whether
or not to include elevation for the GPS position (2D or 3D).
Tap this icon to access the sky plot graph settings. The following
two items can be shown or hidden:
- Grid: Grid lines intersecting at the center of the graph
- Track: Color curve showing satellite orbit versus time.
Tap this icon to access the PDOP graph settings. The following
three items can be shown or hidden:
- Grid: Grid lines
- PDOP: PDOP value versus time
- Availability: Count of visible satellites versus time.
Tap this icon to read the software version of the Mission Plan-
ning utility.
48
Screen