Subsequent Uses; Standard Re-Start Procedure - Magellan MobileMapper CX Getting Started Manual

Subsequent Uses

Standard Re-Start Procedure

Next time you turn on MobileMapper CX and the cell phone,
the procedure for re-establishing the GPRS connection will be
significantly shorter, as explained below. Because the two de-
vices were paired when first using them, you don't need to
make the cell phone discoverable.
1. On MobileMapper CX, tap
double-tap Bluetooth Manager to re-start Bluetooth Man-
ager.
2. Tap to list the existing shortcuts.
3. Double-tap the Dial-Up Networking icon. This re-estab-
lishes the Bluetooth connection between the cell phone
and MobileMapper CX. Tap OK to close the message win-
dow.
4. Tap to minimize the Bluetooth Manager window.
>Settings>Network and Dial-up Connections.
5. Tap
6. Double-tap the "My Cell Phone" icon you have created in
the initial procedure (see page 24).
7. Tap on the Connect button. The following messages appear
successively: "Opening Port", "Dialing...",... "User
Authenticated" and "Connected". The GPRS connection
is now established.
8. Tap Hide to close the message window.
9. Tap to close the Connection window.
10.Select your DGPS mode (see Selecting a DGPS Mode on
page 29).
>Settings>Control Panel and
27