The Nav 1 Screen; Customizing The Nav 1 Screen - Magellan Map 410 User Manual

T NAV 1 S
HE CREEN
The NAV 1 screen displays your destination along with four selectable
navigation measurements and a graphical compass.
Destination
Name
Destination Icon
Compass
The NAV 1 screen displays a numerical reading at 30˚ increments with the
characters N (0 ), S (180 ), E (90 ) and W (270 ). Course is shown
numerically and represented by the Position Icon at the bottom of the screen.
Above the compass, bearing will be displayed with the icon of the
destination waypoint. When the bearing to your destination cannot be
displayed within the confines of the displayed compass, an arrow will be
displayed either on the right or left to indicate the steering direction.
Ideally, when you are navigating, the Position Icon and the Destination Icon
should line up, one above the other.

Customizing the NAV 1 Screen

You can change the four navigational fields. You can
choose from BRG, DST, SOG, COG, VMG, CTS, ETA,
ETE, XTE, TRN, ALT, TME, TMP and Blank.
From the
NAV 1
screen.
Use UP/DOWN ARROW
KEYS to highlight the
field you wish to change.
ENTER
MARK
in the customize mode.
14
TO: FISH
DST
SOG
XTE
VMG
BRG
120
COG
Use UP/DOWN
MENU ARROW KEYS to
highlight CUSTOMIZE.
A pop-up
ENTER
menu appears.
MARK
You are returned
to the NAV1 screen
50.2 n
m
8.2 K
T
n
3.80 R
m
K
7.2
T
127
m
150 S
Position Icon
150
m
ENTER
MARK
Use UP/DOWN
ARROW KEYS to
highlight your choice.
You can continue customizing
using the same steps or
press QUIT to exit this mode.
Magellan MAP 410 GPS Receiver
Selectable
Navigation
Data
CUSTOMIZE WPT NAMES WPT NAMES WPT NAMES
BRG 027
OFF OFF
DST 50.2
ON ON
SOG 8.2
KT
COG 056
VMG 7.2
KT
CTS 028
ETA 01:09P
ETE 02H24M
XTE L.2
nm
TRN L26
F
ALT 83
T
TME 01:09P
TMP 25 C
BLANK
m
nm
m
m