Using The Nav 1 Screen - Magellan GPS ColorTRAK User Manual

When your speed is zero, the
receiver is in automatic
averaging mode, the date and
EPE will be replaced by the
averaging timer, as shown.

Using the NAV 1 Screen

The NAV 1 screen displays your destination along with four selectable
navigation measurements and a graphical compass.
Destination
Name
Destination Icon
Compass
The NAV 1 screen displays a numerical reading at 30˚ increments with the
characters N (0°), S (180°), E (90°) and W (270°). Course is shown
numerically and represented by the Position Icon at the bottom of the screen.
Above the compass, bearing will be displayed with the icon of the destination
waypoint. When the bearing to your destination cannot be displayed within
the confines of the displayed compass, an arrow will be displayed either on
the right or left to indicate the steering direction.
Ideally, when you are navigating, the Position Icon and the Destination Icon
should line up, one above the other.
Magellan GPS ColorTRAK
AVERAGING
SPEED
5 . 3 8
TO: CAMP
50.2 n
DST
m
K
8.2
SOG
T
n
3.80 R
XTE
m
K
7.2
VMG
T
°
127
BRG
m
120 150 S
°
150
COG
m
POSITION
34 ˚ 06.52
N
117˚49.56
W
ELEV 10900 FT
11:23:35 PM
00:00:35
TRIP
n
K 2 3 8 . 8
m
T
°
COURSE 150
m
120 150 S
Selectable
Navigation
Data
Position Icon
17