Service Aids; Recommended Service Tools - Motorola CDM Series Detailed Service Manual

Chapter 3

SERVICE AIDS

1.0

Recommended Service Tools

Table 3-1 lists the service tools recommended for working on the radio. While all of these items are
available from Motorola, most are standard workshop equipment items, and any equivalent item
capable of the same performance may be substituted for the item listed.
Motorola Part No.
0180302E51
0180386A78
0180303E45
0180357A57
0180358A56
0180386A82
1010041A86
3080070N01
3080369B71
3080369B72
6680309B53
6680384A98
6684253C72
6686119B01
8180384J59
8180384J60
8180384J61
8180384L95
Table 3-1 Recommended Service Tools
Description
Master lens system
Illuminated magnifying glass
with lens attachment
SMD tool kit (included with
R1319_)
Wall-Mounted Power Supply
Wall-Mounted Power Supply
Anti-static Grounding Kit
Solder (RMA type), 63/67,
0.5 mm diameter, 1 lb. spool
Programming Cable
Computer Interface Cable
Computer Interface Cable
Rework equipment catalog
Brush
Straight prober
Removal Tool
Housing Eliminator (short)
Housing Eliminator (medium)
Housing Eliminator (long)
Housing Eliminator (short + top)
Application
Illumination and magnification of components
-
Used to supply power to the RIB (120 VAC)
Used to supply power to the RIB (220 VAC)
Used during all radio assembly and disassembly
procedures
-
Connects RIB to radio microphone input
Connects the RIB to the computer (25-pin)
Connects the RIB to the computer 9-pin (Use for IBM
PC AT–other IBM models use the B71 cable above)
Contains application notes, procedures, and technical
references used to rework equipment
-
-
Assists in the removal of radio control head
Test fixture used to bench test the radio PCB
Test fixture used to bench test the radio PCB
Test fixture used to bench test the radio PCB
Test fixture used to bench test the radio PCB (radio
uses pressure pads to retain PCB)
Section 1: 3-1
6881091C63-F