Table of Contents
Advertisement
2-16
9.0
Service Aids
Table 2-2 lists service aids recommended for working on the Mag One™ by Motorola Radios. While all of
these items are available from Motorola, most are standard shop equipment items, and any equivalent
item capable of the same performance may be substituted for the item listed.
Motorola Part
No.
PMDN4038_R
PMDN4039_R
PMDN4040_R
PMDN4041_R
PMDN4043_R
PMDN4060_R
PMDN4042_R
PMDN4054_R
PMDN4044_R
PMDN4026_R
PMDN4053_R
TT907A National
Service Technical
Guide
Table 2-2 Service Aids
Description
Chassis Opener
Crab Eye Nut Opener
Test Box
RF Adapter
Programming/Test
Cable
Cloning Cable
Battery Eliminator
Antenna Ground Plate
T-Head Ceramic
Tuning Tool
Flat Ceramic Tuning
Tool (1.8mm)
Flat Ceramic Tuning
Tool (0.9mm)
Phillips Head
Screwdriver
Flat Head Screwdriver
Tweezers
Repairing Leadless
Component
Assemblies
Application
To disassemble the radio
To fasten or remove crab-eye nut.
Enables connection to the audio/accessory jack.
Adapts radio antenna port to BNC cabling of test
equipment.
Connects radio to Computer.
Allows a radio to be duplicated from a master radio by
transferring programmed data from the master radio to
the other.
Interconnects radio to power supply (red-and-black
power cable included).
To improve grounding while conducting tuning and
measurement.
To tune the variable resistor for audio and sub-audio
modulation adjustment; tuning points accessible via
battery-chassis area.
To tune the variable resistor for audio and sub-audio
modulation adjustment; requires disassembly of PCB
from chassis to get access to tuning point.
To remove M2 and M2.6 Phillips screws.
To remove speaker from speaker felt.
To remove smaller components i.e. latch pad and
speaker connector.
Guide on how to successfully remove and replace
surface mount devices.
Service Aids
Advertisement
Table of Contents
