Stihl SR 200 Instruction Manual page 20

English
Other Hints on Starting
If the engine stops while the choke knob
in on g or during acceleration
Move the choke knob to < and
N
continue cranking until the engine
runs.
If engine does not start
Make sure all settings are correct
N
(choke knob, setting lever in run
position F).
Repeat the starting procedure.
N
If fuel tank has been run completely dry
and then refueled
Press the manual fuel pump bulb at
N
least five times – even if the bulb is
filled with fuel.
18
As soon as the engine runs
Operate the throttle trigger.
N
Choke knob automatically returns to
N
the run position F when the throttle
trigger is operated.
At very low outside temperatures
Open throttle slightly – warm up the
N
engine for a short period.
Stopping the Engine
Move the setting lever in the
N
direction of 0 – the engine stops –
the setting lever springs back to the
on position.
SR 200