Stihl SR 200 Instruction Manual page 15

Attach throttle cable to retainer (4).
N
Secure hose with retainer (5) to
N
third pleat (arrow) in pleated hose.
Mounting the Blower Tube and Nozzle
2 1
Push the blower tube (1) into the
N
stub of pleated hose (2) as far as
the stop.
Push the nozzle (3) onto blower
N
tube as far as stop – metering
knob (4) must be in line with the
control handle.
SR 200
Adjusting and Securing the Control
5
Handle
Put the machine on your back and
N
adjust the harness – see "Harness".
4
Slide the control handle (1) along
N
the tube to the most comfortable
position – distance between nozzle
outlet (2) and the control handle (1)
4
must be at least 500 mm (20 in) (a).
3
Secure the hose clamp (1) with the
N
screw (3).
a
1
2
1
3
Adjusting the Throttle Cable
It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
Set throttle trigger to the full throttle
N
position – as far as stop.
Carefully rotate the screw in the
N
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another full turn.
English
13