Download Print this page

Stihl SR 200 Instruction Manual page 16

Hide thumbs Also See for SR 200:

Advertisement

English
Harness
Adjusting the Harness
Pull the ends of the straps
N
downwards to tighten the harness.
Adjust the harness so that the
N
backplate fits snugly and securely
against your back.
Loosening the Harness
Lift the tabs of the sliding adjusters.
N
14
Disconnecting Harness from Backplate
1
Pull the ring (1) out of the slot.
N
Fuel
This engine is certified to operate on
unleaded gasoline and the STIHL two-
stroke engine oil at a mix ratio of 50:1.
Your engine requires a mixture of high-
quality gasoline and two-stroke air
cooled engine oil.
Use mid-grade unleaded gasoline with a
minimum octane rating of 89 ((R+M)/2)
and no more than 10% ethanol content.
Fuel with a lower octane rating may
increase engine temperatures. This, in
turn, increases the risk of piston seizure
and damage to the engine.
The chemical composition of the fuel is
also important. Some fuel additives not
only detrimentally affect elastomers
(carburetor diaphragms, oil seals, fuel
lines, etc.), but magnesium castings and
catalytic converters as well. This could
cause running problems or even
damage the engine. For this reason
STIHL recommends that you use only
high-quality unleaded gasoline!
Gasoline with an ethanol content of
more than 10% can cause running
problems and major damage in engines
and should not be used.
The ethanol content in gasoline affects
engine running speed – it may be
necessary to readjust the carburetor if
you use fuels with various ethanol
contents.
SR 200

Advertisement

loading