Power Supply; Atx 20-Pin Power Connector: Atx1; Atx 12V Power Connector: Jpw1; Floppy Disk Drive Connector: Fdd1 - MSI MS-6787 Instruction Manual

Power Supply

The mainboard supports ATX power supply for the power system. Before inserting the power supply
connector, always make sure that all components are installed properly to ensure that no damage will
be caused. A 300W or above power supply is suggested.

ATX 20-Pin Power Connector: ATX1

This connector allows you to connect to an ATX power supply. To connect to the ATX power supply,
make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned.
Then push down the power supply firmly into the connector.
5 V GND
GN D
5 V -5V GN D
20
10
5 V_ SB GN D
1 2V
P W_ OK 5 V

ATX 12V Power Connector: JPW1

This 12V power connector is used to provide power to the CPU.
3 4
12V
GND
1 2

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that supports 360K, 720K, 1.2M, 1.44M
and 2.88M floppy disk types.
Volt N ot ch
G ND 3 .3V
PS _ON
- 1 2 V
11
1
GN D G N D 3 .3V
5V 3 .3V
12V
G ND
7