Power Supply - MSI TRINERGY Series Manual

p S
ower uppLy
ATX 24-pn Power Connector: JPWR1
Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX
24-pn power supply, make sure the plug of the power supply s nserted n the proper
orentaton and the pns are algned. Then push down the power supply firmly nto the
connector.
You may use the 20-pn ATX power supply as you lke. If you'd lke to use the 20-pn
ATX power supply, please plug your power supply along wth pn 1 & pn 13.
ATX 8-pn Power Connector: JPWR2
Ths connector s used to provde 12V power output to the CPU.
Important
• Make sure that all the connectors are connected to proper ATX power supples to
ensure stable operaton of the manboard.
Power supply of 400 watts (and above) s hghly recommended for system stablty.
•
ATX 12V power connecton should be greater than 18A.
•
MS-7580 MS-7580
2-9