Frequency/Voltage Control - MSI MS-6787 Instruction Manual

be affected.
Load Optimized Defaults
Use this menu to load factory default settings into the BIOS for stable system performance operations.
Set Supervisor Password
Use this menu to set Supervisor Password.
Set User Password
Use this menu to set User Password.
Save & Exit Setup
Save changes to CMOS and exit setup.
Exit Without Saving
Abandon all changes and exit setup.

Frequency/Voltage Control

CPU VID
This item specifies the voltage of CPU Vcore. Note that changing CPU Vcore could result in unstable
system; therefore, it is not recommended to change the default setting for long-term purpose.
CPU Clock Ratio
End users can overclock the processor (only if the processor supports so) by specifying the CPU ratio
(clock multiplier) in this field.
Auto Detect PCI/DIMM Clk
This item is used to auto detect the PCI slots. When set to Enabled, the system will remove (turn off)
clocks from empty PCI slots to minimize the electromagnetic interference (EMI).
Spread Spectrum
When the motherboard's clock generator pulses, the extreme values (spikes) of the pulses creates EMI
(Electromagnetic Interference). The Spread Spectrum function reduces the EMI generated by
modulating the pulses so that the spikes of the pulses are reduced to flatter curves. If you do not have
any EMI problem, leave the setting at Disabled for optimal system stability and performance. But if you
are plagued by EMI, set to Enabled for EMI reduction. Remember to disable Spread Spectrum if you
14