MS-6702 ATX Mainboard
2. Select a desired multi-channel operation from Number of Speaker.
a. Headphone for the common headphone
b. 2-Channel Mode for Stereo-Speaker Output
c. 4-Channel Mode for 4-Speaker Output
d. 6-Channel Mode for 5.1-Speaker Output
3. Here it shows the multi-channel setting for the audio jack. Please connect
your speakers to the correct phone jack in accordance with the setting
displayed here.
4. Then click OK to apply the configuration.
Speaker Test
You can use this tab to test each connected speaker to ensure if 4- or 6-
channel audio operation works properly. If any speaker fails to make sound,
then check whether the cable is inserted firmly to the connector or replace the
bad speakers with good ones.
Front Left
Rear Left
Select this function
A-8
Center
Front Right
Rear Right
Subwoofer