Ddr Dimm Module Combination; Installing Ddr Modules - MSI K8T Neo-FSR User Manual

MS-6702 ATX Mainboard

DDR DIMM Module Combination

Install at least one DIMM module on the slots. Memory modules can be
installed on the slots in any order. You can install either single- or double-
sided modules to meet your own needs.
Memory modules can be installed in any combination as follows:
DIMM 1 (Bank 0 & 1)
DIMM 2 (Bank 2 & 3)
DIMM 3 (Bank 4 & 5)
Maximum System Memory Supported
S: Single Side

Installing DDR Modules

1. The DDR DIMM has only one notch on the center of module. The mod-
ule will only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then
push it in until the golden finger of the memory module is deeply inserted
in the socket.
MSI Reminds You...
You can barely see the golden finger if the module is properly
inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
2-10
Slot
D: Double Side
Volt
Memory Module
S/D
S/D
S/D
64MB~2GB
Notch