MSI K8T Neo-FSR User Manual page 70

V-Link Data 2X Support
This setting controls the onboard V-Link Data 2X Support. Setting options:
Enabled, Disabled.
Floopy Disk Controller
This is used to enable or disable the onboard Floppy controller.
Option Description
Auto BIOS will automatically determine whether to enable the
onboard Floppy controller or not.
Enabled Enables the onboard Floppy controller.
Disabled Disables the onboard Floppy controller.
Serial Port 1
These items specify the base I/O port addresses of the onboard Serial Port 1
(COM A). Selecting Auto allows AMIBIOS to automatically determine the
correct base I/O port address. Settings: Auto, 3F8/COM1, 2F8/COM2, 3E8/
COM3, 2E8/COM4 and Disabled.
Port2 Mode
This item sets the operation mode for Serial Port 2. Settings: Normal,
1.6 uS, 3/16 Baud and ASKIR (the last three operation modes are setting
options for IR function).
IR Pin Select
Set to IRRX/IRTX when using an internal IR module connected to the IR
header. Set to SINB/SOUTB. when connecting an IR adapter to COM B.
Parallel Port
This field specifies the base I/O port address of the onboard parallel port.
Selecting Auto allows AMIBIOS to automatically determine the correct base
I/O port address. Settings: Auto, 378, 278, Disabled.
Port Mode
This item selects the operation mode for the parallel port: ECP, Normal,
Bi-Dir or EPP.
BIOS Setup
3-21