Integrated Peripherals - MSI 848P Neo-V Series User Manual

Please note that the options showed on your BIOS might be different de-
pending on the motherboard you buy.
USB Controller
This setting is used to enable/disable the onboard USB controllers. Setting options:
[Disabled], [Enabled].
USB Device Legacy Support
Set to [Enabled] if your need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS and SCO
Unix. Set to [Disabled] only if you want to use any USB device other than the USB
mouse. Setting options: [Disabled], [Enabled].
On-Chip IDE Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
On-Chip ATA(s) Operate Mode
This setting allows you to determine how the RAID controller on the south
bridge is going to switch to SATA controller. [Legacy Mode] means you may use
the traditional 14 and 15 IRQs, while [Native Mode] means you may use all the
available IRQs. Setting options: [Legacy Mode], [Native Mode].

Integrated Peripherals

BIOS Setup
3-19