MSI 848P Neo-V Series User Manual page 54

OnBoard LAN
This setting controls the onboard LAN controller. Setting options: [Disabled], [Enabled].
AC'97 Audio
This item is used to enable or disable the onboard AC'97 (Audio Codec'97) feature.
Selecting [Auto] allows the mainboard to detect whether an audio device is used. If
an audio device is detected, the onboard AC'97 controller will be enabled; if not, the
controller is disabled. Disable the function if you want to use other controller cards to
connect an audio device. Settings: [Disabled] and [Auto].
Set Super I/O
Press <Enter> to enter the sub-menu and the following screen appears:
OnBoard FDC
Select [Enabled] if your system has a floppy disk controller (FDD) installed on
the system board and you wish to use it.
Option Description
[Auto] BIOS will automatically determine whether to enable the
onboard Floppy controller or not.
[Enabled] Enables the onboard Floppy controller.
[Disabled] Disables the onboard Floppy controller.
Onboard Serial Port A
This item specifies the base I/O port addresses of the onboard Serial Port 1
(COM A). Selecting [Auto] allows AMIBIOS to automatically determine the cor-
rect base I/O port address. Settings: [Auto], [3F8/COM1], [2F8/COM2], [3E8/
COM3], [2E8/COM4] and [Disabled].
Onboard Parallel Port
This field specifies the base I/O port address of the onboard parallel port.
Selecting [Auto] allows AMIBIOS to automatically determine the correct base I/O
port address. Settings: [Auto], [378], [278], [3BC] and [Disabled].
Parallel Port Mode
This item selects the operation mode for the onboard parallel port: [ECP], [Normal],
[Bi-Dir] or [EPP].
BIOS Setup
3-21