MSI 848P Neo-V Series User Manual page 43

MS-6788 ATX Mainboard
MPS Revision
This field allows you to select which MPS (Multi-Processor Specification) version to
be used for the operating system. You need to select the MPS version supported by
your operating system. To find out which version to use, consult the vendor of your
operating system. Settings: [1.4], [1.1].
APIC ACPI SCI IRQ
This field is used to enable or disable the APIC (Advanced Programmable Interrupt
Controller). Due to compliance to PC2001 design guide, the system is able to run in
APIC mode. Enabling APIC mode will expand available IRQs resources for the system.
Settings: [Enabled], [Disabled].
CPU L1 & L2 Cache
Cache memory is additional memory that is much faster than conventional DRAM
(system memory). When the CPU requests data, the system transfers the requested
data from the main DRAM into cache memory, for even faster access by the CPU. The
settings enable/disable the internal cache (also known as L1 or level 1 cache) and
external cache (also known as L2 or level 2 cache). Setting options: [Enabled],
[Disabled].
System BIOS Cacheable
Selecting [Enabled] allows caching of the system BIOS ROM at F0000h-FFFFFh,
resulting in better system performance. However, if any program writes to this
memory area, a system error may result. Setting options: [Enabled], [Disabled].
C000, 32k Shadow
This item specifies how the contents of the adapter ROM named in the item are
handled. Settings are described below:
Option Description
[Disabled] The specified ROM is not copied to RAM.
[Enabled] The contents of specified ROM are copied to RAM for faster
system performance.
[Cached] The contents of specified ROM are not only copied to RAM, the
contents of the ROM area can be written to and read from cache
memory.
3-10