Table of Contents
Advertisement
Innovative Hearth Products
DRT4200 Series Direct-Vent Gas Fireplaces
Installing the DRT4200 Series 40" and 45" logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Table 34 - 40" and 45" Log Sets
4
1. If necessary, remove the glass door (Page 57).
2. Position the rear log #1 (Figures 44) on the two rear setting pins shown in Figures 43.
Figure 43 - Locate log setting pins
Grate
The setting pins, indicated by the arrows, are for the middle and rear log.
3. Place the left rear log #2 (Figure 45) over the 2 left pins on log #1 (Figure 44).
4. Place the upper right rear log #3 (Figure 46) over the 2 right pins on log #1 (Figure 44).
Figure 45 - Place log #2
5
3
2
1
2
6
Log Number
1
2
7
3
4
5
6
7
Catalog number for the entire set:
J8301 - 40"; J8303 - 45"
Figure 44 - Place log #1
Figure 46 - Place log #3
Operation
900636-01, 01/2017
Description
Bottom Rear Log
Upper Left Rear Log
Upper Right Rear Log
Middle Left Log
Front Left Forked Log
Front Right Forked Log
Upper Right Forked Log
1
3
55
Advertisement
Table of Contents
