Plug-In Hybrid Settings - Mercedes-Benz S-Class 2022 Owner's Manual

Select Dashcam.
#
Select Track Race or Drag Race
#
Activate recording.
You can set which overlay is to be used in the
#
Video overlay
recorded video under

Plug-in hybrid settings

Configuring the charging settings
Multimedia system:
© Hybrid Charging
4 5 5
Setting the charging program
Select Home, Work or Standard.
#
Opening the socket flap
Press Open socket flap.
#
The socket flap opens and can be closed
again by hand.
Unlocking the charging cable (mode 3 or 4)
When the function is active, the charging cable is
unlocked when the maximum charge level is
reached.
Select Home
#
and activate Activate or deactivate
#
Activating or deactivating location-based charging
Select Charge at home
#
contents.
Activate or deactivate
#
tion.
When the function is activated, the vehicle's cur-
rent position is saved as one of the selected
options. When the address is reached again, a
brief query appears as to whether the respective
charging program should be selected.
Activating or deactivating rapid charging
Activate or deactivate the
#
function.
Rapid charging
The
mum possible charging capacity at charging sta-
tions up to 60 kW in order to charge the vehicle's
high-voltage battery faster. After the charging
process is complete, the charging capacity in the
"Standard" charging program is again limited to
20 kW in order to protect the high-voltage battery.
or Work.
Unlock charging cable.
or Charge at work.
Select based on loca-
Rapid charging
function increases the maxi-
MBUX multimedia system 389
Setting the departure time
The set departure times are used for the vehicle's
pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. When rapid charging is
deactivated, the charging process start time is
optimised for the next departure time. When rapid
charging is activated, the charging process starts
immediately, irrespective of the next departure
time.
Select Next departure time.
#
The following charging times can be selected:
individual charging times
R
a Week profile
R
Setting an individual departure time
Select Add new timeand set the time.
#
or
Select ´ and adapt an existing departure
#
time.
Setting the repeat days
Select Add new timeand set the time.
#