Configuring settings for plug-in hybrid vehi‐
cles
Multimedia system:
©
EQ
4
5
Setting the charging process
Select
Departure
Time.
#
The following charging times can be selected:
Once (00:00)
R
Week Profile
R
Select a setting.
#
Setting a single departure time
Select
Departure
Time.
#
Select
Edit Once-only
Time.
#
Set a departure time.
#
Setting the week profile
Select
Departure
Time.
#
Select
Edit Week
Profile.
#
Add New Time
#
Set the desired departure times, e.g. every
#
day at 8:00 a.m.
Select a.
#
Setting the maximum charging current
Select
Maximum Charge
Current.
#
Select Maximum,
8 Amps
or
6
Amps.
#
When the battery is charged, the charging
current is limited to the selected amperage.
Functions of the energy flow display
1
Charge level of the high-voltage battery
2
Combustion engine
MBUX multimedia system
3
Energy flow
4
High-voltage battery
The active components of the hybrid system are
highlighted in the energy flow display. The
energy flow between the individual components
is shown in color.
The energy flow is shown in different colors
depending on the operating status:
White: constant energy flow
R
Red: high energy flow (boost effect)
R
Green: low-emission energy flow in the case
R
of recuperation, electric mode and when
charging the high-voltage battery
Showing the energy flow display
Multimedia system:
©
EQ
4
5
Select
Energy
Flow.
#
The visualization of the energy flow in the
vehicle is displayed.
21