Mercedes-Benz S-Class 2022 Owner's Manual page 56

Seat belt adjustment function
®
Vehicles with PRE-SAFE : after a front seat belt
has been fastened, the automatic seat belt adjust-
ment may apply a certain tightening force. Do not
hold the seat belt tightly while it is adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia system
( page 53).
/
Activating/deactivating seat belt adjustment via
the multimedia system
Multimedia system:
© Settings Vehicle
4 5 5
Occupant protection
5
Activate or deactivate Belt adjustment.
#
Releasing seat belts
Press the release button in the seat belt
#
buckle and guide the seat belt back with the
seat belt tongue.
Seat belt warning function for the driver and front
passenger
The ü seat belt warning lamp in the driver's
display is a reminder that all vehicle occupants
must wear their seat belts correctly.
In addition, a warning tone may sound.
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
Function of the rear seat belt status display
The rear seat belt status display is only available
for certain countries.
Occupant safety
When the vehicle is switched on, the rear seat
belt status display informs you for a certain
amount of time which rear seat belt is not fas-
tened.
The status of the rear seat belt can be recognised
by the colour of the symbol in the driver's display:
Grey: the seat belt tongue of a rear seat belt is
R
not engaged in the seat belt buckle of the cor-
responding seat.
Green: the seat belt tongue of a rear seat belt
R
is engaged in the seat belt buckle of the corre-
sponding seat.
Every vehicle occupant must always fasten
their seat belt correctly before starting a jour-
ney.
Red: a vehicle occupant in the rear passenger
R
compartment has released the seat belt
buckle using the release button and may not
be properly secured.
If a vehicle occupant unfastens a seat belt in the
rear, the rear seat belt status display appears
again.
In addition, a warning tone may sound.
53