Mercedes-Benz S-Class 2022 Owner's Manual page 388

Measuring time on a saved track
#
Select All tracks.
Select the desired track.
#
Select u.
#
Start timing
Select if you are already at the
#
starting line.
or
Select Navigate to for navigation to the start-
#
ing line.
Timing begins automatically when the starting line
has been crossed.
%
When ¨ is selected, the track display can
be switched to AR. In addition, it is possible to
switch to the telemetry display by selecting
ò.
Select ð Stop timing
to end timing.
#
Confirm the prompt with OK.
#
Select the weather.
#
Select Yes to save the times driven for this
#
track.
Showing readings during Track Race
The following readings can be shown:
Tyre temperature
R
Miniature map
R
Sector overview
R
Engine data
R
G-force display
R
Lap overview
R
Select ï Start timing.
#
#
Select .
Drag the desired display from the grid on the
#
left or right edge of the central display.
The readings are shown during the Track
Race.
By selecting ¨ on the active display, you can
deactivate this.
MBUX multimedia system 385
Displaying the analysis
#
Select All tracks.
An overview of all the driven tracks appears.
Select a track.
#
Select a session.
#
The following data are displayed:
Lap and sector times
R
Average and top speed
R
Driver
R
Vehicle
R
Date
R
Weather
R
Select Add recording to use a different ses-
#
sion as a reference value.
Select % to return to the overview.
#
Select Diagram.
#
Set the desired parameters.
#
The analysis is displayed.