Table of Contents
Advertisement
Overview of the charging process status
Status of the
Display
charging
process
2
#
Flashes
orange
#
Flashes green
#
Lights up
orange
#
Lights up
green
#
Flashes red
(for approx.
90 s)
Starting the alternating current charging process
(mode 2/3)
Meaning
& DANGER Risk of death when charging at a
damaged socket
Connection is
The charging process uses high voltage.
being estab-
If the charging cable, the vehicle socket or the
lished
mains socket are damaged, you could receive
an electric shock.
Active energy
flow
Only use an undamaged charging cable.
#
Avoid mechanical damage such as crush-
Interruption in
#
ing, abrading or driving over the cable.
charging
Have a damaged vehicle socket replaced
#
Charging
at a qualified specialist workshop as
process com-
soon as possible.
pleted
Never connect the charging cable to a
#
Vehicle mal-
damaged vehicle socket.
function;
charging is
not possible
Driving and parking 249
* NOTE Damage due to overheating of
charging cable and charging cable con-
nector
During the charging process, the charging
cable and charging cable connector can heat
up within their permissible limit values.
The permissible limit values are influenced by
the following factors:
the power supply system and the charging
R
cable are not damaged
the instructions for handling the charging
R
cable and the control element on the
charging cable have been observed
If the charging cable or charging cable
#
connector becomes too hot, have the
power supply system checked.
* NOTE Damaged or dirty vehicle socket
when the socket flap is open
Always keep the socket cover and the
#
socket flap closed when there is no
Advertisement
Table of Contents
