Mercedes-Benz S-Class 2022 Owner's Manual page 181

178 Light and sight
Adaptive Highbeam Assist Plus automatically
switches between the following types of light:
Low beam
R
Partial high beam
R
High beam
R
ULTRA RANGE Highbeam (only vehicles with
R
DIGITAL LIGHT)
ULTRA RANGE Highbeam increases the bright-
ness of the cone of light to the legally permitted
maximum.
Partial high beam does not include other road
users in the high beam area. It does not dazzle
them but enables full high beam illumination for
the driver apart from the excluded vehicles. Highly
reflective signs are also illuminated with reduced
brightness.
At speeds below 25 km/h or when there is suffi-
cient street lighting:
Partial high beam and the high beam will be
R
switched off automatically.
At speeds greater than 30 km/h:
If no other road users are detected, high beam
R
will switch on automatically.
If other road users are detected, partial high
R
beam will switch on automatically.
At speeds above 40 km/h:
If no other road users are detected on a
R
straight road, ULTRA RANGE Highbeam will be
switched on automatically.
If other road users are detected, partial high
R
beam will switch on automatically.
If highly reflective signs are detected, ULTRA
R
RANGE Highbeam will be switched off auto-
matically.
%
The system's optical sensor is located behind
the windscreen near the overhead control
panel.
Switching Adaptive Highbeam Assist Plus on/off
Switching on
Turn the light switch to the à position.
#
Switch on the high beam using the combina-
#
tion switch.
If Adaptive Highbeam Assist Plus is activated,
the _ indicator lamp will light up on the
driver's display. When partial high beam or
high beam is active, the corresponding blue
indicator lamp will also light up.
Switching off
Switch off the high beam using the combina-
#
tion switch.