Table of Contents
Advertisement
C. Non-Combustible Sealant Material
After completing the installation of non-combustible
material in the required non-combustible zone and the
non-combustible finishing material over that, a bead of
non-combustible sealant must be used to close off any
gaps at the top and sides between the fireplace and
hearth.
These metal surfaces
may be covered
with non-combustible
material.
Figure 7.10 Place Non-combustible Sealant
WARNING! Risk of Fire!
Hearth & Home Technologies is not responsible for
discoloration, cracking or other material failures of
finishing materials due to heat exposure or smoke.
• Choose finishing materials carefully.
300° silicone
sealant around
edge of fireplace
and drywall.
Heat & Glo • EM-415, EM-485T Installers Manual • 4017-268 • Rev S • 01/22
31
Advertisement
Table of Contents
