Connecting To A Multi-Channel Dvr - Appendix #4 - Lorex SG17L7584 Instruction Manual

Connecting to a Multi-Channel DVR - Appendix #4

The SG17L7584 Observation System can be used with a Multi-Channel DVR (not included). A
Multi-Channel DVR enables you to record multiple video streams with a single device
NOTE: The CH1 - CH8 BNC Video in-
puts serve as Looping Video Outputs
by individual channels when a DIN
camera is connected to the associat-
ed channel.
1. Attach the BNC to RCA
(Male to Female)
adapters on the BNC
CH1-CH8 found on the
Observation System.
2. Attach the BNC to RCA
(Male to Female)
Adapters on the BNC
CH1-CH8 found on the
DVR
3. Connect the standard RCA cables
from the Observation System to the
DVR.
4. Connect the Audio Cables from the
Observation System CH1-CH8 to
the DVR CH1-CH8
5. Connect cables from the DVR
Video / Audio Out to the VCR IN
(Video and Audio)
Observation System
To switch from viewing the
Observation System to viewing the
DVR, press the VCR button on the
front panel of the Observation
System.
RCA to BNC
Adaptor
on the
Connecting to a Multi-Channel DVR - Appendix #4
OBSERVATION SYSTEM
DVR UNIT
(Not Included)
43