Troubleshooting - Lorex SG17L7584 Instruction Manual

Troubleshooting

Troubleshooting
When a malfunction occurs, it may not be serious and can be corrected easily. The following
describes the most common problems and solutions. Please refer to the following before calling
your Observation System dealer
Problem:
Observation System Unit is not receiving power, or is not powering up
Check:
• Confirm that all cables are connected correctly
• Confirm that the ON/OFF (I/O) switch on the rear of the unit (beside the power cable connection)
is ON (in the I position)
• Confirm that there is power at the outlet:
Connecting the power cable to another outlet
Test the outlet with another plugged device (such as an electric calculator or
phone charger)
• If the unit is connected through a power bar or surge protector, try bypassing the bar and
connecting the power directly to the wall outlet
Problem:
Observation System is not responding when any of the buttons are pushed or does not come out
of STANDBY MODE
Check:
• Turn the master power switch OFF using the (I/O) switch on the rear of the unit (beside the
power cable connection):
Press the (I/O) switch to the OFF position (O)
Wait for 1 minute - all LED light indicators on the front of the unit will be off
Press the (I/O) switch to the ON position (I)
The unit will make an audible alert when powered back on
38