Title Set - Lorex SG17L7584 Instruction Manual

4. RETURN - Return to the MAIN MENU. Navigate
by pressing the and
press the OK button to select
5. EXIT - Return to the camera view. Navigate by
pressing the and
press the OK button to select

Title Set

This submenu allows you to change the displayed description of the camera (8 character max.).
This is useful for identifying camera locations (i.e. "FRNT DR" (Front Door), "DOCK 1" (Loading
Dock #1), etc.) Available characters include A-Z, 0-9, and space.
1. DISPLAY - Sets the camera TITLE display on the
monitor. Navigate by pressing the
to highlight, and press the OK button to change
between Y and N. Selecting Y will display each
camera title, while selecting N will remove the
description from the ON SCREEN DISPLAY.
2. CH1 - CH8 - Set the TITLE for individual cameras.
To set the camera TITLE, navigate by pressing the
and buttons to highlight, and press the OK
button to select. Navigate by using the
buttons, and use the
numbers and letters. Press the OK button to accept
the change. There is a limit of 8 characters.
3. RETURN - Return to the MAIN MENU. Navigate
by pressing the and
press the OK button to select
4. EXIT - Return to the camera view. Navigate by
pressing the and
press the OK button to select
buttons to highlight, and
buttons to highlight, and
and buttons
and
and buttons to select
buttons to highlight, and
buttons to highlight, and
[PIP/POP SET]
PIP SEQUENCE
PIP POSITION
POP POSITION
RETURN
EXIT
[TITLE SET]
DISPLAY :
CH1 :
CH2 :
CH3 :
CH4 :
CH5 :
CH6 :
CH7 :
CH8 :
RETURN :
EXIT :
Title Set
: [SUB]
: [00]
: [01]
: [ ]
: [ ]
[Y]
[C1]
[C2]
[C3]
[C4]
[C5]
[C6]
[C7]
[C8]
[ ]
[ ]
25