Furuno ECDIS FMD-3200 Installation Manual page 82

APPENDIX 4 ALERT LIST
Priority: Alarm, Warning, Caution
Alert No.
ALF ID ALR ID
3005,- 465
3038,1 -
to
3038,199
3038, -
100000
3038,1001 -
to
3038,1199
3037,1001 -
to
3037,1199
3028,1001 -
to
3028,1199
3027,1001 -
to
3027,1199
3065,- 159
3003,- 985
3003,1 541
3003,2 667
3012,8 154
3012,7 155
80746,2 698
AP-10
Alert Name, Meaning and Remedy
Name: Invalid Datum
Meaning: Primary position sensor uses non-WGS-84 da-
tum or missing datum information.
Remedy: Check status of GPS sensor.
Name: WPT Approach XX (XX is WPT No.)
Meaning: The wheel over point has been approached.
Remedy: Take helm if needed.
Name: Critical Area
Meaning: Entering user chart notes area.
Remedy: Confirm description of notes.
Name: WOL Approach XX (XX is WPT No.)
Meaning: The wheel over line has been approached in
track control.
Remedy: Watch and acknowledge alert.
Name: WOL Approach XX (XX is WPT No.)
Meaning: The wheel over line has been approached in
track control.
Remedy: Watch and acknowledge alert.
Name: WOL XX (XX is WPT No.)
Meaning: The wheel over line has been passed in track
control.
Remedy: Watch and acknowledge alert.
Name: Wheel Over Line
Meaning: The wheel over line has been approached in
track control.
Remedy: Watch and acknowledge alert.
Name: Speed Too Low
Meaning: Speed is too low during track control.
Remedy: Increase speed or stop track control.
Name: Lost Interface
Meaning: Data from external equipment is lost.
Remedy: Check connection of external equipment
Name: AIS MSG Send ERR
Meaning: AIS message transmission failed.
Remedy: Check the connection with AIS.
Name: AP Receive Error
Meaning: Communication between AP and ECDIS is dis-
continued.
Remedy: Check the connection in the Autopilot.
Name: POSN Discrepancy
Meaning: There is a difference between position sensors
during track control.
Remedy: Monitor situation carefully, or stop track control.
Name: HDG Discrepancy
Meaning: There is a difference between heading sensors
during track control.
Remedy: Monitor situation carefully, or stop track control.
Name: No POSN Monitor
Meaning: Position monitor function cannot be used be-
cause several position sensors are not available.
Remedy: Check the position monitor status.
Priority/
Category
Warning/B
Warning/A
Warning/A
Warning/A,
TCS
Alarm/A,
TCS
Warning/A,
TCS
Alarm/A,
TCS
Warning/B,
TCS
Caution/B
Caution/B
Caution/B
Warning/A,
TCS
Warning/A,
TCS
Caution/B,
TCS